Network Emergency Evacuation Panel
Description
The TECHMA TCM-EMP3EV Network Emergency Alarm Interface is used in a public address system to produce an alarm sound either by an emergency signal through connection to a fire alarm system or by manual operation on front panel, it can output 2 different messages (Siren, Evacuation). Produces an alarm sound automatically when activated by an external signal or manually by the knobs and pushbuttons on front panel. Can output pre-loaded messages and 1 recorded message. A PTT handy microphone is available on the front panel for announcer message to all speaker.
Features
- Network Interface 10/100Base-TX, RJ45
- Protocol TCP/IP, SIP, UDP, Multicast
- Audio Codec G.711a/u, G.722, G.729
- IP Speaker selected Audio Alarm target
- Hand Held PTT Microphone Prioritas
- LED display screen with flash indicator to show the fire status
- Sirene & Indonesian Voice Audio Message
- Support multi brand Fire Alarm System
- Manual/Auto trigger recorded message
- Standard 19″ 2U rack-mounting housing
Spesification
Specification:
| Model | TECHMA TCM-EMP3EV |
| Audio Output | SIREN/Play/EMIC2 > or = to 8 mV, unbalanced |
| TRIG Output | Short Circuit signal activation output |
| Record Input | MIC >or= to 8 mV unbalanced, Line >or= 330mV unbalanced |
| Alarm Input | Short Circuit signal input |
| Alarm activation mode | Manual operation / alarm signal |
| Power Requirements | 24VDC/500MA |
| Display | LCD Indicator |
| Power Consumption | Less than 10W |
| Built-in Dimensions | 2 U rack 19 inch |
| Dimensions | 89(H) x 483(W) x 366(D) mm. |
