Digital Network Audio Terminal
Descriptions
Based on ARM + DSP structure and high speed industry chip, reboot time is less than 1 second . With 2 aux inputs; and each with independent volume control. Built-in 3W high fidelity speaker to monitor the sound of the remote IP speaker Stand alone to route audio to the IP network without server. With a standard RJ45 port supportive of crossing network segment and router, accessible to the system if the Ethernet is available.
Features
- Based on ARM + DSP structure and high speed industry chip, reboot time is less than 1 second
- With 2 aux inputs; and each with independent volume control.
- Built-in 3W high fidelity speaker to monitor the sound of the remote IP speaker
- Stand alone to route audio to the IP network without server.
- With a standard RJ45 port supportive of crossing network segment and router, accessible to the system if the Ethernet is available
Spesification
Specification:
| Model | TECHMA TCM-NAS400 |
| Power Consumption | Less than 300mV |
| Protocol | IP, ARP, ICMP, DHCP, UDP, DNS, IGMP |
| Operation Temperature | 10 ℃ – 60℃, <90% RH |
| Inputs | MIC: 50mVpp, Aux: 1.5vpp |
| Power requirements | 220-240VAC, 50/60Hz |
| Frequency Range (Hz) | n/a |
| Thermal Conductivity | 1.08-8.0W/M-K |
| Continous use temp | -40 to 300 |
| Breakdown Voltage | 5000-7000VAC/mm |
| UL Flammability Rating | 94 V0 |
| Dimension (L x W x H) | 485*220*65mm |
