11 Port SFP Gigabit PoE Switch 120Watt
Feature
- Using CAT.5 network pacth cords support power for the wireless AP and IP Camera.
- Networking standard: IEEE802.3af/at/bt.
- POE power light blinks to determine the power status of the receiving end, and each blink is 2.7 watts.
- PoE Watchdog AI Function: Detection front-end PoE cameras and PD, Automatic detection, Automatic restart.
- Upload port automatic flip (auto MDI/MDIX)
- 6KV lightning protection, 8KV surge protection, anti-reverse connection, over-current protection, over-voltage protection, over-temperature protection, Short circuit protection
- The port power is 60watts, it is convenient for high-power device
- Zero configuration feature power supply is automatically supplied to the adaptive equipment
Spesification
Specification:
| Model | TECHMA TCM-P9811F4 |
| Network Interface | 1~6 10/100M af/at, 7~8 1000M af |
| Uplink LAN 2*1000M/1*SFP 1.25G up to 20 KM | |
| Orange port is Gigabit port, Blue port is 60W Power Supper port | |
| Transmission Rate | 2000Mbps Full Duplex; 10 or 100 or 1000 Mbps Half Duplex |
| Network Interface: 10 BASE-T or 1000BASE-TX RJ45 port of Ethernet | |
| Performance & Specification | Bandwidth: 9.2 Gbps (no barriers) |
| Network Latency (10 to 1000 Mbps) 20us (use the 64 byte package size) | |
| MAC address table: 8K | |
| The Frame Filter & Transmission Rate: 14800 pps the most for 10M, 14880000 pps the mosst for 1000M port | |
| Networking Standard | IEEE802.3i 10BASE-T |
| IEEE802.3u 100BASE-TX/TX iEEE802.3ab 1000BASE-TX | |
| IEEE802.3x Flow Control | |
| IEEE802.3af/at/bt Power over Ethernet | |
| PoE Core | Default: 1/2(+), 3/6(-); 1245(+), 3678(-) |
| LEDs Light | PWR light always on |
| Power Support | Power input: AC 110~220V 120W, Power output: PoE 1~6 port: 1/2 (+52V), 3/6(GND) |
| PoE 7~8 port: 1245 (+53V), 3678(GND) compatible 1/2 (+52V), 3/6 (GND) |
